Sokkia Series 50 Total Station Manual

Some time ago a reader was looking for this manual, months later he found it and sent it to me. Returning the favor, I am posting it here for you to download.

This is the operator manual, official Sokkia, in Spanish, which serves the equipment:

I leave the index to catch the attention, at the end is the download link.

Initial Recommendations

1. PRECAUTIONS FOR SAFE OPERATION
2. PRECAUTIONS
3. LASER SAFETY INFORMATION
4. SET FUNCTIONS
4.1 Instrument Parts
4.2 Mode Scheme
4.3 Wireless Bluetooth Technology

Introduction

5. BASIC OPERATION
5.1. Basic key operation
5.2 Display Functions
6. USING THE BATTERY
6.1 Charging the battery
6.2 Installing / Removing the Battery

Preparation for measurement

7. ASSEMBLY OF THE INSTRUMENT
7.1 Centered
7.2 Leveling
8. FOCUSING AND OBSERVING THE OBJECTIVE
9. SWITCHED ON
10. CONNECTION TO EXTERNAL DEVICES
10.1 Settings required for Bluetooth communication
10.2 Establishing a connection between SET and a Bluetooth pairing device
10.3 Measurement through Bluetooth communication
10.4 Data logging / dump via Bluetooth communication
10.5 Connection via communication cable

Measurement Mode

11. ANGULAR MEASUREMENT
11.1 Measurement of horizontal angle between two points (Horizontal angle 0 °)
11.2 Adjusting the horizontal angle to a required value (Fixed horizontal angle)
11.3 Repeating the horizontal angle
11.4 Measurement of angles and data dump
12. DISTANCE MEASUREMENT
12.1 Checking the returned signal
12.2 Measurement of distances and angles
12.3 Recovering measured data
12.4 Distance measurement and data dump
12.5 REM measurement
13. MEASURING COORDINATES
13.1 Input of data in instrument station and azimuth angle
13.2 Setting the azimuth angle from the coordinates of the previous point
13.3 Measurement of three-dimensional coordinates
13.4 Coordinate measurement and data dump
14. RESECTION MEASUREMENT
14.1 Coordinate resection measurement
14.2 Measurement by resection of heights
15. REPLACEMENT MEASUREMENT
15.1 Measurement of coordinate stakeout
15.2 Stakeout measurement by distance
15.3 REM Stake Measurement
16. REPLACEMENT LINE
16.1 Definition of the baseline
16.2 Point of the stakeout line
16.3 Stakeout line line
17. REPLACEMENT ARCH
17.1 Defining an arc
17.2 Stakeout Arch
18. PROJECTION OF POINTS
18.1 Definition of the baseline
18.2 Projection of points
19. INTERSECTIONS
20. POLYGONAL ADJUSTMENT
21. MEASUREMENT BY DISPLACEMENT
21.1 Measurement by displacement of a single distance
21.2 Angle measurement by displacement
21.3 Measurement by displacement of two distances
22. MEASUREMENT BETWEEN POINTS
22.1 Measuring the distance between two or more points
22.2 Change starting point
23. CALCULATING THE AREA OF A SURFACE

Measurement mode measurement

24. RECORDING OF DATA - MENU RECORD -
24.1 Recording Instrument Station Data
24.2 Recording of the previous point
24.3 Recording Angle Measurement Data
24.4 Recording of distance measurement data
24.5 Recording Coordinate Data
24.6 Recording Distance Data and Coordinate Data
24.7 Recording notes
24.8 Review of JOB data
24.9 Deleting data from a registered JOB

Memory mode data management

25. SELECTING / ELIMINATING A JOB
25.1 Selection of a JOB
25.2 Deleting a JOB
26. REGISTRATION / DISPOSAL OF DATA
26.1 Registration / deletion of data from known points
26.2 Review of known point data
26.3 Registration / deletion of codes
26.4 Revision of codes
27. DUMPING OF DATA IN A JOB
27.1 Dump of data from a JOB to host computer
27.2 Dump the data from a JOB to a printer
28. TRANSFER OF DATA WITH THE SFX FUNCTION
28.1 Required items
28.2 Connection of all equipment
28.3 Starting and Disconnecting SFX
28.4 Setting a password
28.5 Internet Provider Information Record
28.6 Registering the FTP Server Information
28.7 Registering an Email Address
28.8 Sending E-mail (Job Data)
28.9 Receiving email with SET (coordinate data)
28.10Connecting to the FTP server (coordinate data / job data)
28.11Send email to SET
28.12Reception email from SET
28.13 Troubleshooting

Media Mode Data Management

29. USE OF AN EXTERNAL MEMORY MEDIA
29.1 Inserting the USB memory device / SD card
29.2 Selecting the media type
29.3 Storing the data of a job on external memory media
29.4 Read data from known points
29.5 Display and Edit Files
29.6 Formatting the selected external memory media

Additional Details

30. CHANGING CONFIGURATION
30.1 EDM Settings
30.2 Settings-Config-
30.3 Function Assignment for Keys
30.4 Change password
30.5 Recovery of the default configuration

Problem solving

31. WARNING AND ERROR MESSAGES
32. CHECKS AND ADJUSTMENTS
32.1 Alidade Level
32.2 Circular level
32.3 Tilt sensor
32.4 Collimation
32.5 Grid
32.6 Optical plummet
32.7 Constant of additional distance
32.8 Guide light
32.9 Laser plummet

Model Information

33. POWER SOURCES
34. OBJECTIVE SYSTEM
35. STANDARD EQUIPMENT
36. OPTIONAL ACCESSORIES
37. SPECIFICATIONS
38. EXPLANATION
38.1 Manual indexing of the vertical circle by measurements of the left side and the right side
38.2 Atmospheric correction for high precision distance measurement
39. REGULATIONS

download Manual